Water Heater Repair St Petersburg's Blog

St Petersburg FL Homeowner advice and maintenance tips for water heaters.

Operating a Safe Hot Water Heater

Statistically, the hot water heater in ones St Petersburg residence will work with no significant disaster; nevertheless, the opportunity it still there which is why one have to be aware of the safety and security info in this article. We desire all our customers and visitors to be knowledgeable about these water heater safety measures so they can have a safe home.

Major Reasons a Water Heater Will Have a Significant Malfunction

Improper modification of temperature and pressure relief valve settings
Temperature and pressure relief settings are transformed
Unqualified people execute maintenance on the water heater
Lack of routine upkeep by a specialist
Improper setup

How To Decrease Possible Catastrophic Water Heater Issues

Possibly the most vital action a property owner can do to make sure ones water heater is functioning safely is to have an expert service it on a regular basis. A plumbing professional will have the ability to ensure all the safety aspects of the hot water heater are operating as they should, and to make certain it is operating as power successfully as possible as well.

Hot Water Heater Maintenance Tasks for HomeownersWater Heater T&P Valve

The first safety upkeep step homeowners can do is to test the temperature and pressure relief valve at the very least once a year. It should open with little effort and properly snap tight itself when it shuts without leaking water once it is closed again. If it does not open conveniently, and if it does not seal firmly so water does not leak out, it will need to be changed. It is a very easy and cost-effective replacement process. Nonetheless, one that is important, for this part sees to it the pressure inside the water heater storage tank does not enhance to the point of exploding.

Some suggest to change the T&P valve every 3 years, whatever the condition, for precaution.

It is necessary for property owners to be knowledgeable about the temperature level setting of the water heater also. We can not think of any kind of reason it should be set more than 120 degrees, as well as this will be more than lots of people will require. Above this temperature level, one risks skin burns from the hot temperature. If there are kids or elderly people in the house, additional care must be taken with the highest water temperature level.

With water heaters often times housed in a garage where lots of objects are housed and/or youngsters can play, the temperature level setting dial might get bumped by mishap and no one understands it. If the hot water within the house appears hotter compared to regular, check the temperature level setting immediately. If the setting is bumped too high, it may cause an excess of pressure inside the water storage tank also, producing an unsafe scenario.

Infants and small children may not be able to get away from water that may be too hot, and maintaining a constant thermostat setting can help control the water temperature throughout your home—preventing it from getting too high. (read more)

An additional reason ones water becomes hotter compared to normal, if the temperature level setting has actually not been transformed, is that the thermostat is not working properly. It might likewise be the case if the water is colder compared to normal also. If when altering the temperature level does not have much of an impact, there is most likely something wrong with the thermostat and we should take a look at it.

Other St Petersburg Water Heater Safety Steps Homeowners Ought to TakeWater Heater Venting

If one has a gas hot water heater installed, certain treatment has to be taken to avoid fires. A fire might begin if vapors from combustible materials exist. This could quickly hold true in a garage or basement, with cleaning supplies, paint, gas cans, or any other product which contains flammable vapors. Please make sure these items are not in the exact same place of the hot water heater.

Understanding carbon monoxide gas leakages is necessary for home owners additionally. It is very important to have a carbon monoxide detector installed in the house. This dangerous gas could get in the house if a water heater is not properly vented to the outside of the home. This is a major need to have a qualified professional plumbing technician set up ones water heating appliances.

Carbon monoxide gas is odor free, which makes it extremely hard to acknowledge when it is present in the residence. A CO detector will have the ability to warn homeowners of the leak, however also if any person in the residence is currently having issues with dizziness, headaches, chest discomforts, throwing up, mental confusion, these are warning signs of a carbon monoxide leak. If one has any of these signs happening, leave the home promptly, go to the hospital, and call a plumbing or the gas company to test the house.

If you have any gas-fueled appliances (water heater, furnace, oven, clothes dryer, etc.) in your home, a carbon monoxide detector is imperative. The Consumer Product Safety Commission warns carbon monoxide poisoning kills 200 people each year and causes another 10,000 to need hospital treatment. (read more)

Tankless hot water heaters have to likewise be installed appropriately and can cause carbon monoxide gas leaks also otherwise appropriately vented. It is not just a conventional gas water heater problem.

A much less unsafe, however still messy scenario is when a hot water heater is leaking. A little water, or some condensation can occur around the bottom of the water storage tank sometimes. However, if a continuous stream of water, even if it is simply a little proceeds, certainly let us know. This is a sign that something is wrong with the heater. A bulk of hot water heater failing happen as a result of a leak or some amount. The sooner we could inspect for the problem the more probable it will be for us to fix the hot water heater, and the much less likely a little leak can turn into a big leak. A big leak could cause a costly cleaning as well. A 30-50 gallon water leak in the residence is no little feat to tidy up.

With excellent recognition of how ones water heater operates, and with what to look for in warning signs that it is not working appropriately, St Petersburg homeowners could assist to ensure their house is safe from a significant plumbing emergency situation.

How to Stop Safety Concerns With the Home’s Water Heater

The hot water heater within the home could cause several of the greatest catastrophes to a house. Luckily, they operate without the requirement of a lot of routine care and seldom without any type of huge issue. However, the potential for explosion, electrical shock, skin burns, fire are all feasible. Because of this, it is important for all St Petersburg homeowners to be familiar with just how their warm water heater functions. That can start by taking a look at the proprietors manual.

It is easy to ignore ones household hot water heater for they are generally unseen. They stay in the garage, the basement, a storage room, or some location else that is concealed. It is all also simple to ignore things if they run out view.

Upkeep steps like draining the water storage tank every 6 to 12 months and evaluating the T&P valve are actions that have to be performed, If one leaves the home for over 2 weeks hydrogen gas has the ability to build-up inside an electrical water heater. These are just a couple of components of a water heater need to find focus on avoid a huge dangerous situation from taking place.

Once again, make certain to check out the handbook for ones water heater. If you do not have one, possibly the existing water heater was put in by a previous homeowner, yet you must have the ability to seek out on the internet the brand and model of heater to find it. Some of the more crucial aspects to discover are the electrical dangers of the heater and just how they operate. With heating elements being electric and immersed in water, the heating elements are most likely to wear away as they age. A person could obtain an electric shock by touching the metal case of the water storage tank, or metal pipes, if the heating elements short out. A lot of property owners are not experienced with the best ways to work with electric devices, which is why we are constantly right here to aid St Petersburg property owners with they water heater demands.

Possible St Petersburg Hot Water Heater Issues

One does not need to worry about recognizing if ones water heater has something significant incorrect with it. All homeowners will know when it does. Nonetheless, it is learning ways to identify the first indications that something is beginning to fail takes a little practice. One easy method to recognize if there might be an issue is to think of the last time you executed any preventative upkeep. If the answer is never, or a long time ago, it is definitely a good time to do an inspection of the following details.

It ought to not be a big surprise that a water heater could leak water, but this really is just one of the most significant responses from the heater when there is a problem. The source of a water leak can be because of various things however. Not all of them imply that the water heater is going to have to be replaced, which is a good thing. There might just be some condensation underneath the storage tank, or simply a little water beneath the storage tank. It could be a slow-moving drain valve leak which can be a simple, low-cost repair. Maybe a little leak from around the T&P valve, which likewise does not have to be a costly repair. If it is a bigger leak, or if water is continually dripping and all the shutoffs are all right and all the fittings are not loose, it is not an excellent indicator. That, with any indications of rust will typically recommend that the storage tank is rusting through, which will be a factor for a water heater replacement.

The greatest danger with a bigger water leak is the damages it may quickly create to the framework and home furnishings of ones residence. 30 to 50 gallons of water within ones home have the ability to destroy many points swiftly. If the container is rusting inside, it could conveniently burst.

Fires have the ability to begin in the area of ones hot water heater. The pilot light of a gas water heater has a flame. If there are vapors nearby, a fire could start. As an example, if ones heater is located in the garage, and if there is paint, gas for a mower, or cleaning products nearby, it could be the reason for a fire. Storage any kind of combustible item away from the heater.

The federal consumer agency is looking for some way that manufacturers can design water heaters so that they resist igniting volatile fumes. But that may be more difficult than it sounds. . . (read more here)

Scalding from the temperature level of the water is an opportunity. We would not recommend having the thermostat above 120 degrees, and if one has little kids, a reduced temperature level is advisable. It is good to make certain the thermostat does not get bumped by mishap. The thermostat can additionally end up being malfunctioning and can create water that is too hot or not warm enough.

Gas and tankless hot water heater produce carbon monoxide while they are operating, since they make use of natural gas or propane as a fuel source. This gas is vented outdoors and away from homeowners. This is simply among the huge threats of house owners trying to put in a new water heater themselves. There are specific methods to duct the heater to make certain all carbon monoxide goes outside.

Property owners must have a CO2 detector set up in the home. Given that it is an odor-free gas, it is tough to understand if it exists in the residence. Indications of it are if those in the residence are having migraines, stomach aches, really feeling weak, or lightheaded. There are a lot more indications compared to these. Learn more about them from the Centers for Disease Control. Go directly to the hospital if you really feel a person in the house has these indications and call the gas company to inspect for gas.

It is a rare event for a hot water heater to blow up, yet it is still a possibility. The T&P valve manages the accumulation of pressure inside the water tank. If this valve is stuck or is regularly being released, give us a call right away.

Water Heater Maintenance for A Long Life

At some time, ones water heater will need replaced. Parts will eventually stop working or the tank will at some point begin to rust, even with the best maintenance plan. There is no certain method to recognize how many years it will last. It will depend upon the amount of use, top quality of the water, and amount of maintenance that it obtains. With the maintenance checks that house owners can do to be certain it all looks fine, it is still advisable to have a specialist plumbing come examine it every couple of years as well.

The adhering to infographic shows the most crucial upkeep that homeowners must be executing. These, along with anything that the proprietors manual one has actually must be complied with.

St Petersburg Water Heater Safety Maintenance

From Visually.

All About St Petersburg Tankless Water Heaters

For when you want a substitute water heater for your St Petersburg FL home or office, a tankless hot water heater could be a possible choice. Many people still view them as an actually brand-new item in hot water heating and are unsure about how they run, just what the price for them is, and what type of maintenance they will need. These are a few of the topics we might review regarding tankless heating systems in this article. Compared with conventional storage tank heating systems, in general they are 8 to 34 percent a lot more energy efficient, provide an endless supply of hot water, can operate twice the lifespan, and need just about one-fifth of the physical room as other heaters. We will initially look at exactly how tankless hot water heater work.

Exactly How Tankless Water Heaters WorkTankless Water Heater Installation St Petersburg

Tankless water heaters are likewise termed on demand heating systems. This is really suitable for they just heat water as it is called for … on demand. The classic picture most people have of the huge tank water heater in the basement or garage, is constantly heating new or the same water inside its storage tank all day. It needs to make sense that this is a lot more efficient compared to making use of energy to keep water heated. Consider it like maintaining a pot of water heated up on ones stove all day to be all set for when one desires a hot cup of something to drink.

In easy terms, right here are the actions this entails. The homeowner opens a hot water tap in the home. Cold water then moves down a pipe and into the tankless water heater. An electric element or gas burner (depending upon the fuel source for the tankless heater) switches on when it knows warm water is wanted. The heating component is strong enough to heat the water quickly as it goes through, after that on its way to the hot water faucet.

Efficiency and Flow Rate

The standard flow rate is to be able to supply 2 to 5 gallons of hot water each minute. Gas burning tankless devices typically have a higher flow rate than electric heaters. Nonetheless, gas heaters should have an IID, or intermittent ignition device, mounted. What this device does is only permit the pilot light to activate when water is required. Water heaters without it will certainly lose energy for the pilot light can be constantly burning. If the reason of using a tankless hot water heater is to minimize energy usage, after that it only makes good sense to have the most power efficient model possible.

It is this restricted flow rate that is probably the biggest disadvantage to a tankless model. A big model may not have the ability to supply the quanity of hot water needed if let’s imagine a dish washer and shower were operating at the same time. One alternative is to be conscious of exactly what hot water utilizing devices are being made use of at the same time. That is not too tough to do.

One more way to conquer the restricted flow rate is by mounting more than one tankless hot water heater in the home. Given that they are so little and compact, residents can set up dedicated tankless systems right where they might be required, such as in the kitchen area, in the utility room or near individual restrooms. This will reduce the flow rate restriction extremely quickly.

If one does not intend to at first use a tankless design in the entire residence – let us to state that there is no reason to update the existing hot water heater yet. Or, if a hot tub is added, or a brand-new room addition to the home is built the current traditional water is not large sufficient to provide the needed hot water almost everywhere, a tankless design can be made use of an extra heater for merely one or a few areas. It can additionally excel at supplementing a solar water heater also.

Currently let us take a look at energy effectiveness of a tankless hot water heater. Homes that take in less than 41 gallons of hot water a day can supply a 24 to 34 percent boost in water heating performance with a tankless design. For those that utilize a bunch of water, around 86 gallons of hot water daily, can still obtain 8 to 14 percent power financial savings. Though this is a bigger hot water heater setup expense, however approximately 50 % power cost savings are feasible with numerous tankless units near certain hot water outlets.  (http://energy.gov/energysaver/tankless-or-demand-type-water-heaters)

Tankless Water Heater Installment and Upkeep

St Petersburg Tankless hot water heater installations are a bit more complex than a traditional hot water heater. It seems like every person knows a friend or has a relative that could set up a hot water heater. Sure that could conserve a homeowner a little money, yet by having an unlicensed individual do it, it can void the service warranty. A trained professional is needed for the setup to ensure it functions properly and offers the effectiveness one is searching for. There are environment, security aspects, neighborhood building code requirements that should be thought about.

Similar to any water heater, performing maintenance is essential to do in order to prolong the life of the heater and to maintain it operating at peak effectiveness. The owner’s manual will have upkeep suggestions. The main one is to clean the interior with vinegar and flushing out the system.

With having us appropriately install and help keep your brand-new tankless hot water heater, it could easily last two decade or longer. That alone is much longer time than a traditional water heater. Obviously we are here to assist with any kind of tankless water heater repair in St Petersburg that might be required additionally.

Fixing a Water Heater Leak

A leaking water heater may or may definitely not appear to be a significant deal. Nevertheless, it does not matter if it is a significant leak or a tiny leak, either may result in lots of destruction for ones home in the shape of water damage. Often people neglect to comprehend that a little leak is normally the indicator of something much bigger that may be beginning to happen, or may happen in the near future. In the worse predicament, that little leak might become a big deluge if the water heater is close to totally giving out. In any case, we are here to assist with any type of St Petersburg Hot Water Heater Repair which may be necessary.

Aside from water damage to ones property via a leaking storage tank, there are actually health associated worries with any type of water leak within a home. The wetness may result in mold or mildew growth. People who endure allergies or asthma, this is not a fantastic predicament. The EPA mentioned that certain mold spores are hazardous and can lead to serious health problems.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

In hopes that an ongoing water leak will correct on its own and just disappear is a thing that just does not happen sadly. Plumbing leaks only deteriorate eventually. We have put together a step-by-step list of measures to take during these scenarios.

Action Steps for Leaking Water HeatersLeaking St Petersburg Water Heater

1. Initially make sure that it is the water heater that the leaking water is coming from.

When there is water around where the hot water heater is located, the leak may not necessarily be originating from it. Take a look at any water pipes or other things near where the heater is situated. Are there some other appliances close which can create condensation? If ones heater is located in a basement, this may be the case. It might possibly be a furnace drain line also, or coming from a water softener.

Initially, wipe up the water and determine if it comes back any time before long by watching the area frequently. Examine the water heater fully to check if any water is originating from any of the fittings, T&P valve, or drain valve. When it is completely dry, continue to check out additional items and locations close by.

If nothing else is damp in the general region, place paper towels down in the spot that was already wet. Check each hour roughly to make certain the paper towels remain dry. It’s going to be a lot easier to notice the paper towels being wet then the floor. Following a day if nothing at all is wet once more, there should be nothing at all to worry about, nevertheless still keep a watch on it the next couple days. If water is coming back, and there isn’t any other source close by that it could possibly be from, we will carry on to the step two right here to establish the origin of the leak.

2. Turn the water heater’s power offBreaker Box for St Petersburg Water Heater

Preferably, it is well known that water and electric power really do not work well together, so switch off the power for safety reasons.

For gas water heaters, there ought to be an on/off dial that needs to be established to the off position. Keep the gas line on at this point still.

For electric heaters, go to the home’s circuit breaker box and shut off the breaker for the water heater.

3. Turn the water supply off

If one is sure that the leak is originating from the hot water heater, and in cases where it is rather big, switching the water off will eliminate the possibility of water continuing to go into the storage tank and leak within ones house. Once again, with a major leak coming from the heater, and if the shut off valve is unable to be reached or if its no longer working properly, go locate and turn off the main disconnect valve for the whole home. If one is still not certain the leak is coming from the water heater, one can leave the water supply on at this point.

Remember to be mindful that water originating from the storage tank will be hot and could burn ones skin. Most heaters will be established to a temperature of at the very least 120° F, which is able to lead to first degree burns on contact.

4. Identify the leak’s location

We do not require our St Petersburg water heater potential customers to self diagnose their leaks in advance of phoning us, particularly should there be a serious water leak predicament occurring, but the more one can the faster we can assist. Next is a list of probable explanations why the leak is happening.

Leaking Water Connections
Take a look at to assure the cold water inlet as well as the hot water outlet connections are tight. They’re normally situated at the top of the storage tank. Use a pipe wrench to test the connections. This really is a straightforward fix if it is from where the leak is emerging.

Leaking T&P Valve
On the side of the storage tank is the temperature and pressure relief valve. It will also have a drain pipe going down to the ground from it. The valve regulates how much pressure which accumulates inside of the storage tank. It is going to let water out if it has to regulate the pressure. This valve could be the cause of the leak and might need replacing in the event that it fails to remain closed tightly. Glance to verify if any water is leaking from the valve. If water is coming from the valve when its in the shut position, a new valve shall be necessary. This really is an essential valve of the hot water heater, and one that really needs to operate properly. However, replacing it is simple enough and not expensive.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

First, examine to determine if there may very well be debris in the valve. Put a container beneath the discharge tube and open the valve through pulling the tab on the valve. The water which is discharged may clean the valve out and clear away any sort of debris that may be in the path.Leaking Water Heater Drain Valve

Some other reasons for a T&P valve leak may just be high water pressure in the local water system, or coming from a backflow preventer positioned around the water meter.

Leaking Drain Valve
Check out the drain valve at the bottom of the heater. These are typically made of plastic, and for that reason, may wear out in the long run. Ensure that it is shut completely. If the drain valve needs replaced, it is a basic repair.

A drain valve leak might be a result of dirt within the valve. Accomplish this initially. Position a pail underneath the valve and simply turn the dial to open it. Draining some water probably will get rid of the debris. If perhaps right after flushing, it continues to leak, it will need to get replaced.

In case the leak is coming from here and the valve keeps leaking due to the fact it needs changed, try attaching a hose to it and run the hose outside the house. Hopefully that could reduce the water leaking indoors.

Leak on the bottom of the tank
If the tank leaks from the bottom, it implies a significant internal problem. On account of precisely how the water storage tank is manufactured, being covered inside insulation and having an external layer, in case it is leaking, it will probably not be noticeable from the exterior. An internal water leak usually will be visible in the bottom of the tank. The more aged the tank is, the more probable it can be starting to decay and degrade. A rusting tank will need to get changed.

5. Will I have to have a repair or replacement water heater?

Coming from our working experience, we will complete a repair to fix the leak, considerably more often then needing to replace ones heater. The quicker we are able to have a look at the problem, the sooner we can conduct a repair before the damage becoming any worse. We do really suggest that any repairs or replacements be carried out by a professional and not oneself, to guarantee they are completed accurately and up to code. Frequently, manufacturer warranties will be voided in cases where a non-licensed individual works on it.

Thermal Expansion in the Home

What is Thermal Expansion?

Thermal expansion is a serious plumbing issue. But, numerous people aren’t conscious of this distinctive concern because most homes aren’t in danger. Though, a lot of homes which might be at risk of acquiring this plumbing problem aren’t sufficiently protected because code specifications are often not enforced appropriately for older homes. Water particles do not shrink when faced with pressure or cold, however they can expand when faced with heat. In fact, water will be able to expand by 1 / 2 a gallon or over in a 40 gallon water heater tank. This expansion may produce serious concerns in a home which employs a closed plumbing system. Thermal expansion may bring about worn out seals, damaged solenoid valves, and bursted pipes. Thermal expansion could also shorten the life span of ones water heater and, if using a gas or propane fueled water heater, may cause the water heater flue to break creating a carbon monoxide leak. It is very important to know whether or not your residence employs a closed plumbing system and, if it does, the measures to take to safeguard the home from thermal expansion issues.

How to Know if Ones Property is Vulnerablewater heater thermal expansion tank

A property is vulnerable to thermal expansion problems in cases where there is a closed plumbing system, rather than an open system. In an open plumbing system, water inside pipes may exit into the city water main by way of a supply line if taps aren’t being used. However, in a closed plumbing system water has no chance of getting out of the home. Closed systems have one of either a pressure decreasing valve, backflow prevention valve, or a recirculating plump with a check valve. These valves are employed to prevent backflow of water. Closed systems are wonderful if the backflow from the residence can contaminate the water supply. If your property does employ a closed plumbing system but you are taking precautions against thermal expansion issues and your T&P valve is leaking, you might have thermal expansion issues. The temperature and pressure relief valve is found on the water heater, and is a small lever that opens automatically if the temperature or pressure within the tank is above a predetermined setting. The typical setting is 150 psi or 210 degrees fahrenheit. The T&P valve is an emergency valve and isn’t supposed to be used frequently. If it leaks, you should swap it promptly. However, if it continues to leak, it might be an indicator of thermal expansion troubles.

Safeguarding One’s Home from Thermal Expansion Issues

There are 2 primary strategies to avoid thermal expansion complications. Anytime a closed plumbing system is implemented, a thermal expansion device is required by Uniform Plumbing Code. An expansion tank is the typical choice. An expansion tank connects to the water heater tank and gives water overflow another place to go. There are two separate chambers in the expansion tank, one for air and one for water. Air is pumped into the expansion tank to correspond with the pressure of the water. Anytime the water is heated, if it expands too much, it is able to overflow in the tank. As soon as it has cooled down or expanded to its maximum potential, the air inside the expansion tank pushes the water back into the water supply.Water Heater T&P Valve

Due to the fact the air getting pumped into an expansion tank must match the pressure in the water supply, it’s critical that expansion tanks be pressurized properly. There are in depth manufacturer’s guidelines for expansion tanks and it’s incredibly crucial to follow the directions exactly. To test the pressure of one’s water, simply use a water pressure gauge on the water coming out of any tap, and one may check the pressure of the tank by applying a tire air gauge. If the pressure is too low in the expansion tank, water will get in too easily, and in cases where the pressure is too high water won’t be able to enter easily enough.

Expansion tanks normally have a maximum pressure of 150 psi and are sized based upon the capacity of the water heater tank along with the inbound water supply pressure. It will be essential to make sure you have the correct proportions for both before getting an expansion tank.

One can examine the expansion tank’s efficiency anytime the water heater is not heating water. This is accomplished by simply tapping about the tank using your knuckles, a coin, a key or any type of light tapping equipment. It should sound generally empty and echo a little bit, but if you are noticing a short noise that resembles a thud, the tank could have water inside. Find out if there is, in fact, water in the tank by removing the cap protecting the air valve. This kind of cap looks similar to the ones seen on bike tires and car tires. Push down on the pin to observe if air or water comes out. In the event that air comes out, everything is fine, but, if water comes out you may need a different tank. If the rubber separating the air chamber from the water chamber has become weak, water can fill up the air chamber, in that case, you will want to replace the tank. In the event that, while pushing down the pin nothing happens, no water or air comes out, the tank might not have sufficient air inside. This is going to throw off the pressure equilibrium inside the tank. To take care of this situation, turn to the manufacturer’s guidelines and use an air compressor to fill up the air chamber.

Expansion tanks must be maintained each year. Water heaters likewise have to be maintained each year, so it would make sense to carry out both maintenance duties simultaneously.

An additional way to safeguard your house from thermal expansion are valves with discharge outlets. These types of discharge outlets drain the excess water that the plumbing can not store. Toilet fill valves also are a good precautionary measure. These valves drain water to the toilet tank in case the water expands too far.

If perhaps you have a closed plumbing system and you currently have an expansion tank, that is excellent! Nevertheless, make sure to have the expansion tank along with your water heater checked out yearly. Still unsure about what sort of plumbing system is at your property? Find out right away! Regardless if you have applied safeguards in the house, thermal expansion matters can occur. Give Water Heater Repair St Petersburg FL a call today to find out more about keeping your residence secured against thermal expansion problems.

Tips to Improve Water Heater Efficiency

With the winter season ramping up, having a hot shower and washing dishes using hot water is frequently luxurious! However if one’s water heater is taking a long time to warm the water, day to day life can be aggravating and the winter season may seem even colder. It’s very important, if there is a clear difference in one’s water heater’s efficiency throughout the winter months, to get the water heater assessed by us. Nevertheless, there are various upkeep tasks which any homeowner may undertake that could drastically affect the efficiency of the water heater, and help prevent the need for a St Petersburg Water Heater Repair.

Repair Tasks to Improve St Petersburg Water Heater EffectivenessSt Petersburg Water Heater Efficiency

The very first thing one should do if having a hot water problem is to check out the area near the water heater. If the water heater is placed in a basement, particularly an unfinished basement, it could be too cold. It would certainly benefit the hot water heater and, therefore, the water that goes into one’s home, to have the area surrounding the water heater well insulated and not drafty. In addition, the hot water pipes that take the hot water from the water heater to the faucets in the home could be becoming cold and cooling down the water on the trip. It is super easy to wrap pipe insulation around the piping, and the affect can be enormous!

Dip Tube Servicing

Many water heaters have a dip tube, which is a little tube on the base of the tank which lets cold water into the tank without cooling the stored hot water near the top. The dip tube is a plastic material, though, and can break or crack. If the dip tube is damaged, cold water will be able to leak into the hot water storage, which will lead to the water going in the residence to be cooler than desired. The good news is, it is pretty simple to swap most dip tubes.

Water Heater Blankets

These types of uniquely manufactured blankets go over the water heater and keep the temperature of the water steady. One may want to look into a water heater blanket if the water heater is cold to the touch. If a blanket is required, one will be able to move the temperature setting down a bit as the blanket will warm the water, approximately 10 degrees greater than where its set.

In cases where every one of these servicing duties were attempted and one is still having a problem with the temperature of the water, call us! One of our specialists may have to look at the heating element or perhaps the pilot burner. It doesn’t matter the difficulty, we will get ones water heater functioning at top efficiency fast!

Eliminating Water Heater Smell

If perhaps the water coming from the faucets in the home stinks, there may be an issue with your water heater. There may be a couple of different reasons for stinky water, however the primary cause is bacteria. If bacteria is entering into the water, an odor will likely develop. Well water is commonly at fault for this developing. Even so, there are some measures a St Petersburg homeowner could take to stop bacteria from expanding in their water and to eliminate current bacteria and odors.

According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)”  Read more here…

Controlling Water Heater Bacteria Growth

The most effective way to prevent bacteria from growing and resulting in unpleasant tastes and odors throughout one’s home, is to be sure the temperature is fixed at 140 degrees or greater on one’s water heater. At this climate bacteria can’t grow and will die. Whenever your water heater temperature is set below this, bacteria will not only exist but can multiply.

Removing Hot Water Heater BacteriaEliminating St Petersburg Water Heater Odors

In order to eliminate active bacteria and smells, one should make use of harsh chemicals to eliminate it. Chlorine bleach is the most efficient and complete chemical cleaner to use. If you are making an attempt to decontaminate the water and remove the bacteria by using bleach by yourself, be sure to understand the exact technique of doing this. First, the electric or gas going to the hot water heater should be switched off. After that the cold water supply needs to be switched off. Then, you must switch on one of the hot water taps inside the house. This allows air into the tank. Using a garden hose, empty the water out of the hot water heater and close the drain valve once all of the water has been drained. After that, it’s time to pour in the bleach. One needs five oz of bleach for every gallon of water the tank can hold. Unscrew the flexible cold water hose and pour the bleach in the opening. In cases where the cold water hose is not flexible, it may be a wise decision to contact an expert. Attach the water line once again and fill up the tank with water. It’s crucial to turn off the hot water spigot in the home once all of the air is out of the line. It is also extremely important to run each one of the faucets which use hot water within the home until you’re able to smell the bleach. The bacteria which is inside the water heater can also be in piping and taps so you will have to wipe out the bacteria in these locations in the process. Allow the bleach water stay in the tank and in the water lines for around 3 hours without using any hot water. After that one more flush is in order. When the tank is drained for a second time, don’t add additional bleach but fill it back up with water and let it remain in the tank and in the piping for a minimum of thirty minutes. Finally, drain the tank yet again and then replenish the tank with water. Allow each of the hot water fixtures in the home run until you can no longer smell bleach. Either turn the power on again or reignite the pilot light and you will be all set!

For any concerns about water smell, flushing a hot water heater, St Petersburg water heater repairs, or other water heater concerns, give us a call!

What to Check With No Hot Water

There may be occasions whenever one isn’t getting any hot water at all but one knows for sure the water heater is not even close to needing to be swapped out. Right here are three points which Water Heater Repair St Petersburg FL suggests checking first to check if they are the cause. All three are duties which just about any property owner could easily do, as well.

St Petersburg Homeowner Things to Examine When Not Having Any Hot Water from the Water HeaterSt Petersburg water heater repairs

First of all, take a look at the temperature setting on the water heater thermostat. Normally, ones water heater is in an area of the home where there are not many activities which will take place, still it is a possibility that the thermostat was knocked and accidentally lowered. We are parents of small children, and you can’t ever know what can happen. In case it is set at a temp under, say, 100 degrees, it has been shifted. The typical setting ought to be about 120 degrees.

While one is still around the water heater, look to see if the pilot light is still lit. It is a possibility that it has blown out and should be reignited. If the pilot light hasn’t blown out, the water within the storage tank is not going to be very hot for very long. The majority of more modern water heaters contain a self ignition button that makes it straightforward to relight the water heater. When ones heater is not as new and has to be “manually” relit, take a look at the following video to learn the way to do so:

Not to appear silly, but think about whether it is a possibility that the water storage tank is making an attempt at reheating water. When a lot of hot water using things and devices have just completed utilizing, or are in the process of making use of hot water, the storage tank may need to catch up to the hot water requirement. If this is a thing that occurs frequently in ones property, the size of the present water heater might not be adequate for ones hot water preferences. We can help decide if a larger storage tank is necessary. We are also able to share information on tankless water heaters to check if that could be a good choice for the home.

When one has an electric water heater put in in the home, we suggest checking to verify if the breaker got tripped. In cases where it has been tripped, it won’t supply electrical energy for the water heater. If it’s been tripped for quite a while, the water inside the storage tank won’t be very warm, and that is the issue. In case that is the issue, flip the breaker switch off, then switch it to the on position. Wait a few minutes to be sure it remains on and doesn’t trip itself again. In case it does turn off just as before, contact us to determine the reason it isn’t staying on.

There can be other reasons why the water heater is not providing any hot water that we would have to inspect, and are not items one needs to be examining for, on account of safety factors. Though a reasonably safe and maintenance free property appliance, hot water heaters might be harmful and should only be taken care of by a qualified plumber.

Water Heater Replacement Symptoms

It’s not a surprise a hot water heater will need replaced at some point in the future in ones St Petersburg property, still what exactly are the best ways for one to realize when that point is getting closer? It’s always simpler to prepare for this expense in advance, without a doubt. Water Heater Repair St Petersburg FL suggests letting us come in to carry out a yearly inspection of ones water heating system, to guarantee one is getting everything possible from the heater, and also to trying to protect against a surprise malfunction. Our once a year check up will allow for us to keep an eye on ones heater, as well, to help know when its lifespan is nearing an end, so it is not a surprise when it does happen. When, however, one hasn’t had a plumbing repair company examine the heater in quite some time, or at all, the indicators described below could be beneficial for sure.

Old AgeWater Heater Repairs St Petersburg

Not to be extremely obvious, but eventually the water heater will go out because of the age of the system. It is defintely valuable to be aware of about how old the heater is. This might be more challenging if it’s in a property one bought and a different hot water heater system has not been bought oneself. One ought to be able to tell from the manufacturer’s label on the heater, hopefully. The older it gets, the more often one will require maintenance, for sure.

The Growth of Moisture

Of course, one may have humidity in the air, in the home, from several of the day-to-day usages of water, like from baths and showers, dish washing, and washing clothes, however moisture in the air may likewise be caused by the hot water alone. This is a source of moisture that ought not be present and is a cause for concern. When the water heater starts to stop working properly, it might begin to develop small cracks and fractures in the tank. The common expansion that happens when the metal walls of the water heater are heated, can cause water leaks. Leaks can also come about because of connections or fittings becoming loosened. If the leaks keep putting additional moisture in the air, it might gradually bring on mold development and bad inside quality of air.

Rusty Water

Water that is discolored could have causes other than the hot water heater, however if it is only whenever the hot water, not the cold water, is getting used, it is a good likelihood it is coming from in the water storage tank. If the interior of the water heater is beginning to rust, it can typically cause leaks gradually as well. A complete assessment will enable us to determine what we can do to help postpone the necessity for a whole new water heater now. Nevertheless, there will come a day when it makes more sense for a St Petersburg Water Heater Replacement, because it is going to reduce costs on using the heater.